imported_Sullybob
Member
First off I have to thank everyone who posts here and for Autopia.org. I have learned so much that it really is amazing.
Sorry I don't have any before pictures. But we have all seen swirled and marred paint before. If you go to my gallery you can see some shots of the car the last time I worked on the paint. In those pictures You can see lots of scratches and swirls.
Here is what I did.
Wash with EO car wash
Clay with Megs
All polish was done by Cyclo
SSR1 with green pads, didn't do anything
SSR2 with green pad, didn't do anything
SSR2 with the yellow pads helped but so slowly that I switched to SSR3.
SSR3 by yellow pad. After this the paint was very dull
which I had planed for.
SSR1 with the green pad
AIO by Cyclo
SG by hand.
Tires EO wet shine (a free sample came with the applicator) I am liking it, although I don't know if I like it enough to buy it.
Wheel wells Armor All tire foam
All trim has AIO and SG on it.
Vacumed
Meg NXT for all interior plastic and trim
IG for the interior windows.
Last weekend I cleaned the engine compartment, sorry no pics. I used Costco APC diluted 10 to 1. Sprayed almost every thing down and let it dwell for about 5 minutes, kept spraying so that it wouldnt dry out and then scrubbed just about every thing under the hood down, then rinsed. Repeat for the spots that needed it. Armor all tire foam for all the plastic and rubber. Why didn't I ever clean my engine compartment before? It was so easy and when I open the hood its like
Here are the pictures
I think that it looks pretty good. I have a couple of tough spots left that I want to work on over time. Like this one.
You can only see these scratches in the right light and you can feel them with your fingernail. I know that I can't remove them I am just want to minimize them. Some one put I box on my roof and then drug it off.:scared
Thanks for taking the time to look. I welcome all input.
Sorry I don't have any before pictures. But we have all seen swirled and marred paint before. If you go to my gallery you can see some shots of the car the last time I worked on the paint. In those pictures You can see lots of scratches and swirls.
Here is what I did.
Wash with EO car wash
Clay with Megs
All polish was done by Cyclo
SSR1 with green pads, didn't do anything
SSR2 with green pad, didn't do anything
SSR2 with the yellow pads helped but so slowly that I switched to SSR3.
SSR3 by yellow pad. After this the paint was very dull

SSR1 with the green pad
AIO by Cyclo
SG by hand.
Tires EO wet shine (a free sample came with the applicator) I am liking it, although I don't know if I like it enough to buy it.
Wheel wells Armor All tire foam
All trim has AIO and SG on it.
Vacumed
Meg NXT for all interior plastic and trim
IG for the interior windows.
Last weekend I cleaned the engine compartment, sorry no pics. I used Costco APC diluted 10 to 1. Sprayed almost every thing down and let it dwell for about 5 minutes, kept spraying so that it wouldnt dry out and then scrubbed just about every thing under the hood down, then rinsed. Repeat for the spots that needed it. Armor all tire foam for all the plastic and rubber. Why didn't I ever clean my engine compartment before? It was so easy and when I open the hood its like

Here are the pictures




I think that it looks pretty good. I have a couple of tough spots left that I want to work on over time. Like this one.

You can only see these scratches in the right light and you can feel them with your fingernail. I know that I can't remove them I am just want to minimize them. Some one put I box on my roof and then drug it off.:scared
Thanks for taking the time to look. I welcome all input.