Mike,
Here is the exact order I went in...
Before hand I applied Rain X to all windows, rubbed it in and let it dry. Then when you wash the car, wash and dry as you normally would. The windows will come out streak free and sheeting water every time. (Can't take full credit for this one... don't remember who said it though!)
1st- Dawn Wash twice to strip old wax... basically so I can start fresh
2nd- Quick Detail then clay then Quick Detail again (or wash) to remove any clay streaks left on paint.
3rd- Meguiars #9 2.0 (Swirl Remover) applied w/ PC
4th- 2 coats of Meguiars #7 Polish w/ PC
5th- Liquid Glass polymer sealant w/ PC (let cure for 10 mins)
6th- P21S Caranuba Wax applied by hand
7th- Finish w/ QD
The other stuff was in no particular order. Good Luck & Keep us informed!
P.S. The Liquid Glass(synthetic) and P21S(Natural) make a mean combo on light colors. The two of them together give a lot of depth to the paint.
