Envious Eric
New member
:wow::wow::wow:WWWWOOOOOOWWWWW!!!!:wow::wow::wow:
whoever learned how to use a rotary surely shouldn't have done it on a black BMW!!! With all the damage instilled in the paint, 16 hours was needed to bring it back 95%. There were a few rids here and there, and chasing the superficial remaining "light scratches" on a DD black BMW is not reasonable!
At first glance, I looked over the car while it was pretty dirty. i didnt see just how bad the holograms were! I could see a few here and there, but they didnt seem all that deep! Well after a thorough wash, the real damage was revealed!
It took over an hour to find a combo that would work and finish down well enough. I tried going with a 3 step, but it just wasnt happening as too many defects remained...it needed a 4 step process!
Process/Products used:
Wash:
chemical guys wash and gloss
grout sponge
exceldetail monterray WW
Wheels/Tires:
P21S Gel wheel cleaner
various brushes
Megs Safe D-greaser 4:1 on tires
Clay:
megs blue mild
last touch 1:1
Paint correction:
M83 on PFW @ 1300
M105 on orange @ sp.6
M205 on megs yellow @ sp.6
Menzerna FPII on LC blue @sp.6
Protection:
Wolfgange Fuzion hand applied
megs yellow foam applicator
Microfibers used:
Exceldetail monterray WW
Exceldetail titan MF
Cobra Supreme 530
Misc:
megs glass cleaner
chemical guys wet tire shine
chemical guys bare bones
Befores:
whoever learned how to use a rotary surely shouldn't have done it on a black BMW!!! With all the damage instilled in the paint, 16 hours was needed to bring it back 95%. There were a few rids here and there, and chasing the superficial remaining "light scratches" on a DD black BMW is not reasonable!
At first glance, I looked over the car while it was pretty dirty. i didnt see just how bad the holograms were! I could see a few here and there, but they didnt seem all that deep! Well after a thorough wash, the real damage was revealed!
It took over an hour to find a combo that would work and finish down well enough. I tried going with a 3 step, but it just wasnt happening as too many defects remained...it needed a 4 step process!
Process/Products used:
Wash:
chemical guys wash and gloss
grout sponge
exceldetail monterray WW
Wheels/Tires:
P21S Gel wheel cleaner
various brushes
Megs Safe D-greaser 4:1 on tires
Clay:
megs blue mild
last touch 1:1
Paint correction:
M83 on PFW @ 1300
M105 on orange @ sp.6
M205 on megs yellow @ sp.6
Menzerna FPII on LC blue @sp.6
Protection:
Wolfgange Fuzion hand applied
megs yellow foam applicator
Microfibers used:
Exceldetail monterray WW
Exceldetail titan MF
Cobra Supreme 530
Misc:
megs glass cleaner
chemical guys wet tire shine
chemical guys bare bones
Befores: