Elise 135R - No.1

WX51 TXR

WX51 TXR

New member
At last! For the first time in weeks we saw the sun up here in Aberdeenshire yesterday, and I wasn’t about to pass up the opportunity… to get my mate's rather special Elise detailed - it was number one off the production line for the model type. We were snowed off in the run up to Christmas, but yesterday was no warmer… in fact the temperature was a problem, but more on that later.



The Elise is an amazingly curvy car – he took me out for a quick run in it in the autumn, but it’s not until you get your hands on it so to speak that the curvy nature really hits home. Not one panel flat enough for a decent reflection, and lots of small gaps, fins and scoops in need of polishing by hand. Oh well, here goes…



When I turned up the car was dirtier enough to mask the condition of the paint, so first thing to do was get rid of the muck via a normal wash. Here’s the before pics…



before1.jpg




before2.jpg




before3.jpg
 
All the loose stuff was hosed off, then all exterior surfaces were washed with Poorboys Slick & Suds shampoo using a lambswool wash mitt and the two bucket method. I swapped to a microfibre mitt to tackle the wheels, which were suffering from very bad brake dust corrosion. Then I rinsed it all off and finally dried everything using a waffle weave microfibre.



wash1.jpg




wash2.jpg




wash3.jpg
 
Next up we inspected the paint. Somewhat surprisingly, it was actually in great condition. A number of minor scratches, but no swirls, and a lot of stone chips on the front end, but there’s very little you can do about them anyway (they are nearly always to deep to polish out). However, what was clear was that the paint was suffering from a lot of bonded contamination by tar spots, particularly along the sides and on the rear bumper. So, I left the machine polisher in the car and grabbed my clay instead. Firstly I softened the clay bar by sitting it in warm water for a few minutes. Then I clayed all of the painted surfaces, working from the top down, using Clearkote Quikshine as the lubricant and a waffle weave towel to dry the panels as I went. With the Elise being so low, this meant a lot of hard work on my knees – good job I’d taken an old rug along. After claying, I then applied Klasse All In One to all of the painted surfaces and the wheels using a microfibre pad – not so much in this case for the protective qualities, but more the deep chemical cleaning ability, as there were still some tar marks on some of the panels and a lot of stubbornly bonded brake dust on the wheels. Although the weather stayed good the temperature dropped considerably at this time, resulting in dew formation on the panels. Fortunately Klasse All In One likes to be applied using a damp pad, and the dew didn’t affect application at all.



clean1.jpg




clean2.jpg




clean3.jpg
 
Whilst I was cleaning the paint and wheels, my mate took the vacuum cleaner to the interior. Later in the day I cleaned and waxed the sills and dressed some of the hard interior surfaces with Poorboy’s Natural Look Dressing. The rest of the interior is covered in Alcantara, and so only needs light brushing from time to time.



clean4.jpg
 
Next up, final step product of choice for silver cars – Optimum Car Wax. I’m sure you are all sick of me raving about this product, so I’ll stop now and let the pics speak for themselves. They were taken after just one coat (I usually like at least 3-4 coats), but the paint popped just the same. I then dressed the tyres with Poorboy’s Bold N Bright, and all trims with 303 Aerospace Protectant.



wax1.jpg




wax2.jpg




wax3.jpg
 
With the job done and the light fading, here’s a few final pics. Later in the year when it gets warmer and the day length increases, we will have another go at it, this time with the spot buffer to correct a number of paint defects and bring out even more of a glow ready for the summer track season. But for now, all my mate has to do is wash it regularly and apply another coat of Optimum Car Wax and redress the tyres after every other wash or so. If he does that it will look this good for the rest of the winter.



after1.jpg




after2.jpg




after3.jpg
 
Beautiful job. You really give one of the clearest, most concise explanations of your process that I have seen on this website. Excellent teaching abilities! :2thumbs:
 
Nice detail on a nice car. AIO/OCW looks to be a winning combo.

I know how irritating condensation can be during a detail. Good thing it's summer here now. :P

Excellent explanation of your process too.
 
Sludge said:
Beautiful job. You really give one of the clearest, most concise explanations of your process that I have seen on this website. Excellent teaching abilities! :2thumbs:
Click to expand...



The car looks great and we all appreciate your pics and attention to detail. :woohoo:
 
Great write-up and pics!





Looks like an excellent turnout to me.





What kind of winter do you guys have that R-compound tires will suffice?
 
Beautiful detail on an amazing car. You guys get all the good stuff. I am drooling over the Elise and the Type-R in the background that we never got either! I need to move.
 
GSRstilez said:
Great write-up and pics!





Looks like an excellent turnout to me.





What kind of winter do you guys have that R-compound tires will suffice?
Click to expand...



Lol, not too bad - around freezing Nov through Feb, a couple of weeks of snow in that period in a normal year. My friend is a complete track day maniac, hence the rubber, but he does use it as a daily driver too. He drives like Miss Daisy when it's wet, and stays at home when it snows!
 
klnyc said:
Man, my dream car :cool: It this manual or power steering?

Oh btw, who's Civic TR its that?
Click to expand...



Not sure - I'll ask my friend and report back. As for the CTR, that belongs to my friend's friend. He has hinted that he would like me to detail it for him, and boy would I look forward to that one - any suggestions for white? Never detailed a white car before. FMJ any good on white?
 
Looks great! Nice action pics.



If I may make a recommendation - the Quick Shine is too good (and expensive) in my opinion to be used as a clay lube! It is a fantastic QD for the paint, trim and glass after each wash. If you need clay lube, you can mix 1 ounce of mild car was soap in a bottle of water. I use Meguiar's #00, but I'm sure you have something similar.



Just a tip.
 
You must log in or register to reply here.
Back
Top