SpoolinNoMore
New member
Meant to post this a week ago or so, but after receiving my Detailer's Domain "Uber" pad set, they all seemed to do pretty good, however the yellow Compounding pad with light-medium pressure and using Meg's UC was causing bits of the pad to flake off. Is this just fresh foam losing its extra flake and it should stop soon, or is a pad of this density susceptible to being almost brittle?
I was priming the pad before use and brushing it after every 2x2 section that I did to be safe, but was getting yellow pad flakes everywhere (about the size of a drop of water that would hang off of the tip of a sewing needle, sorry for the strange reference but its the closest I could come up with). I'm just wondering if its something I should contact DD about or if its operator error. Thanks in advance!
I was priming the pad before use and brushing it after every 2x2 section that I did to be safe, but was getting yellow pad flakes everywhere (about the size of a drop of water that would hang off of the tip of a sewing needle, sorry for the strange reference but its the closest I could come up with). I'm just wondering if its something I should contact DD about or if its operator error. Thanks in advance!