DACP Questions

F

Fr0zen

New member
Just did DACP the first time to test. I love this product but it just has one flaw maybe its not the product but me I get small swirls from it on the finish and it looks hazy The swirls seem to be going the same way as the rotary. I put some Menzerna Intensive polish on the white pad after and it took them all off and I got an amazeing finish. Not one swirl



Am I doing something wrong because I know scottwax doesnt get the haze after useing it. Should I Go over with DACP again after useing the yellow cutting pad and go over with the white pad. ?





:nixweiss
 
All depends on the severity of the finish. You may be able to just use the white pad with a PC.



Are you using a PC or rotory? You may be getting micro-marring.



Just a matter of pad selection and tool as well as operation.



A softer pad will polish better than cut obviously, but it all depends on how you work the product.



Keep us posted.

Deanski
 
Im useing a rotary with CMA Yellow and White Pad. I used DACP with the yellow first and got small scratchs and swirls in the direction of the rotary. Then I used some Menzerna IP with the white pad and took out all the scratchs to a mirror finish.



My question is can I use DACP with the White pad to get the smaller scratchs out or.
 
You should be able to get it out with white pad. Yellow is a bit hard and more so with rotory. A softer pad may be your answer.



If you got it out with IP/White, then I can assume DACP/White will works just as well, if not better.



Deanski
 
Yeah I love DACP Its my favorite Polish i though i needed Diamond Cut Cleaner But DACP Got it all out. Meguiars makes some quality products.
 
Fr0zen said:
Im useing a rotary with CMA Yellow and White Pad. I used DACP with the yellow first and got small scratchs and swirls in the direction of the rotary. Then I used some Menzerna IP with the white pad and took out all the scratchs to a mirror finish.



My question is can I use DACP with the White pad to get the smaller scratchs out or.
Click to expand...



Yes you can, I did it last weekend or the weekend before on two clients cars. I prefer the white pad and doing the area twice as opposed to the yellow CMS pad. I have a difficult time controling the yellow pad I get rotary marks, with the white pad its like butta!
 
Yeah I also have a Difficult Time controlling the Pad iv used diffrent Rotarys and Pads and never got it. With the CMA Pad it jolts and wiggles alot with the yellow pad. Im going to try and go over it with the yellow pad and then follow with the white.
 
You must log in or register to reply here.
Back
Top