Correct pad with Menzerna IP for swirls!

[msanta]

I am planning on working on my swirls tomorrow, this is what I will do:

1-wash

2-clay

3-Menzerna IP with PC

4-Klasse SG



Now my question is which pad should I use? I ordered three pads from "buff and shine"(yellow, white and dark grey). Yellow I believe is the most coarse one, and grey the finest. How would go about this?

 

[scottabir]

I persoanlly would go at it starting with the white pad and see how it does if you need more cut switch to the yellow pad.

 

[zippymbr]

I second the move from white to yellow. I never get much out of an orange pad and IP. If the swrils are bad you will need to use the yellow pad and crank up the speed on the PC to 5 and go slow.

 

[joebags]

I used the orange 7.5" Advance pad with the IP and it did very little. I am going to try to go with a 4" orange pad and if that doesn't work I'll try a 4" yellow pad. I hope the orange pad works because I see everyones car on here looking so nice and getting swirls/spider webs out and mine are all still there.

 

[msanta]

Thanks for the advice, I'll use the white pad first, I'll post before and after pics of my job!