Confused,why Quick Shine is streaking

E

EJHeath

New member
This is my first post and love this site..Getting use to all the abbreviations and have learned so much..



This evening I tried some ClearKote Quick Shine on one panel and the hood of my Lexus is300 metallic blue (Indigo Ink Pearl) and trying to remove,it streaked like crazy.It was applied over S-100,cured for a few days.I did a search and from what found,it should apply and remove very easily,with no streaking. I misted it on lightly and tried to wiped off right away with a Concour Buffing towel..After trying some Z-6 over top,the streaking was gone.Any ideas? Thanks
 
Sometimes it will streak slightly on a hot surface. Usually rubbing it into the paint a little longer will remove the streaking.



If you bought a gallon and filled it up with water (as instructed), maybe the concentrate wasn't mixed up thoroughly enough. Other than that, I am stumped.
 
Scott,



The surface was cool (sunset) and purchased the Qt. size,but still shook-up to mix well..Maybe like you said, need to rub in longer..Thanks..
 
EJ, go ahead and spray a good qty of it at first.....Saturate the area, then wipe away, refold MF and wipe dry....Its one of the top 3 QD's in my book, shouldnt have any problems with it....
 
I have suddenly started getting some streaking with mine, too. I have been puzzled, because I am using it in the exact same manner. Maybe I am using too much.
 
Hi ZaneO



I was misting a little on about two square Ft.,of a panel or the hood (lightly like always used Z-6) and don't think I was using too much..I'm most likely wrong,but have a theory..When I used the S-100,didn't wipe off soon enough and got some streaking too.I thought I had removed it all,but maybe not and the Quick Shine was just highlighting the reflection of the left over I didn't see..My .02 cents :nixweiss



EJ
 
EJHeath said:
Hi ZaneO



I was misting a little on about two square Ft.,of a panel or the hood (lightly like always used Z-6) and don't think I was using too much..I'm most likely wrong,but have a theory..When I used the S-100,didn't wipe off soon enough and got some streaking too.I thought I had removed it all,but maybe not and the Quick Shine was just highlighting the reflection of the left over I didn't see..My .02 cents :nixweiss



EJ
Click to expand...

Thats why i recommended a little heavier application. QS works great shining up surfaces, spray a little more and its cleaning bonuses really work in!
 
You must log in or register to reply here.
Back
Top