Confused about CCS Green Pads

[Beason]

Is the 6.5" more aggressive then the white pad? Different websites has them at different levels of aggressiveness.

 

[imported_Ivan Rajic]

Green is more aggressive than white... I think it's between orange and white, but I'm sure it's more aggressive than white

 

[P1et]

I'm also under the same impression: green is more aggressive than white.

 

[wannafbody]

green is a heavy polishing pad and is more aggressive than white but softer. It works well with polishes like ZPC or IP.

 

[BigAl3]

not to hijack this thread, but does anyone know if they ever made a green 6.5 flat pad (not the ccs or edge)...

 

[kleraudio]

The green 6.5" ccs pad from autogeek is a custom made pad. It falls into finishing/light polish category. Used for cleaner waxes. One level "under" white. The normal green ccs pad is only available in 7.5 and 8.5 " sizes.



Again that is the info I got from Jason at Autogeek.



The "normal" green ccs pad is between white and orange. It is considered a heavy polishing pad.



Again, autogeek does not offer this "normal" green pad in the 6.5" size so you will have to get it elsewhere.



Jim

 

[AL-53]

I have both the AG green and the danase green and seen no difference in either..both feel the same and perform the same...



the green would fit in between the yellow cut and white polishing....



the green is like a heavy polishing pad....but will finish out LSP ready with a lite polish...even 106FF ....



Al

 

[Beason]

The green 6.5" ccs pad from autogeek is a custom made pad. It falls into finishing/light polish category. Used for cleaner waxes. One level "under" white. The normal green ccs pad is only available in 7.5 and 8.5 " sizes.



Again that is the info I got from Jason at Autogeek.



The "normal" green ccs pad is between white and orange. It is considered a heavy polishing pad.



Again, autogeek does not offer this "normal" green pad in the 6.5" size so you will have to get it elsewhere.



Jim

so is the Pakshak green normal? Stronger then the White?

 

[kleraudio]

Beason, Yes the ones on PakShak are the regular green heavy cutting pad. They are stronger than the white.



Jim

 

[Beason]

Beason, Yes the ones on PakShak are the regular green heavy cutting pad. They are stronger than the white.



Jim

thank you. just placed my order

 

[wannafbody]

What about the CMA CCS green pad?

 

[BigHonu]

Green CCS from PakShak are the heavy polishing and more aggressive than the white CCS pads. Finished down great using FK1-215 on pearl white while taking out some waterspot etching. I like that the pad is soft and can flow with the contours of the panel much better than the stiff orange pads.