Cleaning Kompressor Pads

H

Husker Z

New member
Any tips/suggestions/must-dos/anything?

I have always just tossed my pads in the washing machine, but these things are fantastic, I don't want to mess them up.

Thank you.
 
I just add some dawn or apc-both in a bucket and let um soak. Wring them out and flood with water and air dry. It seems to work OK on my pads, Just make sure you get the soap out 100%.:thumbup:
 
I also use some pad cleaner then a brush to clean them.Use alot of clean water then hang them up to dry working good so far
 
Mustangous said:
First time i cleaned my pads i use suggestoins from this thread...
http://truthindetailing.com/Forum/showthread.php?t=1383&highlight=cleaning
I ended up spraying the pad with purple power diluted 4:1 and worked in with my thumbs. Then rinsed under very warm water. I could believe they looked like new again.
What an great site..!
oh and i just squeeze together like a pancake to get as much water out as i can, then throw it on the rotory and spin dry...
Click to expand...

Awesome, I just hand washed them and now they are in the washing machine getting soaked and then I'll run them through again with no soap and two rinses. Even before hitting the washing machine they looked good.

Thanks again guys, this site is great!!
 
I use the Snappy Clean product, just a little in a clean plastic tub, put very hot water in there, drop the pads in, push them down so they soak up the soap, next day or whenever, take them out, rinse them well, squeeze them until you see clear water coming out, and let them dry wherever they can, preferably on edge so air gets all around them. I never have problems with this method either.

DanF
 
You must log in or register to reply here.
Back
Top