Clay bar -> Klasse AIO -> Wax

P

porterror

New member
Well, hopefully by this friday my klasse AIO + #16 should arrive to my house. This will be my first time trying my new method of



NXT wash -> Magic Clay Bar -> AIO -> NXT Tech -> Wait 48 hours -> #16



I wont' be using any machines for the process, even though i'm saving for PC. Are there any tips for applying the AIO and clay bar? these are the only really new things to my process. I've heard some horror stories with the AIO being hard to buff out and leaving bad marks on the paint? But, i've also heard amazing stories of how well the paint looks with the AIO -> Wax process. Also, any tips for a first time clay bar'er?



Thanks in advance.
 
I never like using the AIO for some reason, although it works pretty well. I started using the stuff in my shower (don't laugh) since I wasn't having much fun with it on the autos. Have one of those acrylic type tub surrounds that had so much soap scum and other stains that I couldn't get off with anything. So I tried AIO and it took it right off. Anyways, I found the claybar to be a no brainer. Just use plenty of the QD lube that comes with it. And be careful not to contaminate it by dropping it or laying it somewhere.
 
I've used AIO on our car and the shower, lol, and both with no problem. You don't want to use too much. Just work it in thinly and then wipe off. It's really easy.
 
hmm. worried about making streaks. how much time should i wait between AIO -> 1st coat wax?? and should i wash my car again after using AIO??
 
No time to wait to apply wax after AIO



Work AIO till there is nothing left. Then just use a MF towel to remove any remains. If there is AIO stuck dried or streaks, use the applicator to work on that area, removing the streak or excess.
 
should i appy AIO just like wax? use one for application and MF towel wipe off haze? Also, should i not let it set as long as i do with the wax??
 
I like to apply AIO one panel at a time and then buff it off. I apply it with over lapping motions, side to side, up and down and some times ovals when applying by hand.
 
sounds good to me.



i'm going to go with



NXT Wash -> Clay Bar (magic) -> AIO -> NXT Tech -> #16 or Sourvan if i can get a hold of some cheap.



As for the Klasse AIO, do you need to apply Klasse SG after the AIO?? or can you just skip the SG and go to a wax??
 
You must log in or register to reply here.
Back
Top