Ca. Water Blade with S&W

[97F1504x4]

Well i was out washing and detailing the truck this morning and while the truck was still wet and before i took the Ca. Water Blade to it to remove the heavy water i decided to spray it down with a nice coating of the S&W to see what would happen. Well the results were great it really seemed to help the blade glide effortlessly across the surface and then when i went to the WW after the Blade it was much easier to get rid of any spot or what have you that may have been left. I also use the S&W lightly while drying and have been doing that for awhile now but i really like the way it made the blade slide over the paint.

Richard

 

[vwgtivw]

Thanks for the tip. I will have to try it out tomorrow.

 

[holland_patrick]

WOW just reading the title I though you might have sprayed the product on and then wiped off with the blade..

but you saved the day

:bigups

 

[GearHead_1]

WOW just reading the title I though you might have sprayed the product on and then wiped off with the blade..

but you saved the day

:bigups

So this would be a problem? :yay

 

[jaybs02]

WOW just reading the title I though you might have sprayed the product on and then wiped off with the blade..

but you saved the day

:bigups

I was thinking the same thing.

Glad it turned out for the best:yay

"J"

 

[97F1504x4]

WOW just reading the title I though you might have sprayed the product on and then wiped off with the blade..

but you saved the day

:bigups

That is exactly what i did do. Very little S&W is used, just a very light misting over the top of the water. It then makes the blade slide very easily over the surface.. I do not use the CWB to remove all water just the large amounts i then follow with a WW and another light misting of the S&W

Richard

 

[The Chee]

When I first read the title, I was thinking you S&W a dusty car with a waterblade!!!!! EEK!!:bubba

 

[97F1504x4]

O you guys menat spraying the S&W on a dirty truck or car and then wiping with the blade. OK i get it now. NO NO NO I would never do that.

RIchard

 

[vwgtivw]

OK, I tried this little trick tonight and all I can say is HOLY SLICKNESS BATMAN. The CWB just slid right across the surface. No chatter what so ever. Thank for the tip Richard.:bigups