Racer
New member
Hi there
This detail is my first one with 2 wheels rig , i guess it went ok rearding my "lack" of experience detailing bikes
I´ve been curious about doing a work like that, so after some insistence i give up and do it.
Its a Bmw R1100 Randy Mamola Edition, there are only 2 bikes in Portugal... damn expensive and rare, so i started a little slow.
General condition is awesome, the panels have some swirls and some rubber marks, the pipes a little heat marks...and
a combination of mud and dust.
The panels were taken out and detailed apart, that´s a photo of the bike stripped, after the wash
I washed with sonax and used a LOT of 1z W99 ( engine degreaser ), and clayed
I polished the panels with orange and IP and finished with white pad and Final Finish.
Sealed with grojet 2000 ( same as AIO ) and waxed with nattys.
The rubber and plastics got 1z balsam, and others protection rubber 1z gummifleger.
- Wheels polished with 1z PP , sealed with PB WS and waxed with #16 ( for the looks :dancin ).
PB BnB on tires
The seat 1z Intensive Plastic cleaner and 1z Tifefenfleger
Mother plastics polish on the lights
1Z Chrome on the inox and chromes, didnt have Autosol Metal Polish that day
Let go to the before :
carbon fiber panel, it rests around 5 cm above ground and its VERY expensive :doh
And now the after :
Even with white colours, nattys get the best of the looks..impressive.
and some swirl free shoots of the Bmw
Now im a very big detail bike fan , let´s hope i get more :dancin
Akele abraço
This detail is my first one with 2 wheels rig , i guess it went ok rearding my "lack" of experience detailing bikes
I´ve been curious about doing a work like that, so after some insistence i give up and do it.
Its a Bmw R1100 Randy Mamola Edition, there are only 2 bikes in Portugal... damn expensive and rare, so i started a little slow.
General condition is awesome, the panels have some swirls and some rubber marks, the pipes a little heat marks...and
a combination of mud and dust.
The panels were taken out and detailed apart, that´s a photo of the bike stripped, after the wash
I washed with sonax and used a LOT of 1z W99 ( engine degreaser ), and clayed
I polished the panels with orange and IP and finished with white pad and Final Finish.
Sealed with grojet 2000 ( same as AIO ) and waxed with nattys.
The rubber and plastics got 1z balsam, and others protection rubber 1z gummifleger.
- Wheels polished with 1z PP , sealed with PB WS and waxed with #16 ( for the looks :dancin ).
PB BnB on tires
The seat 1z Intensive Plastic cleaner and 1z Tifefenfleger
Mother plastics polish on the lights
1Z Chrome on the inox and chromes, didnt have Autosol Metal Polish that day
Let go to the before :
carbon fiber panel, it rests around 5 cm above ground and its VERY expensive :doh
And now the after :
Even with white colours, nattys get the best of the looks..impressive.
and some swirl free shoots of the Bmw
Now im a very big detail bike fan , let´s hope i get more :dancin
Akele abraço
