Blue PWC Question

97F1504x4

97F1504x4

New member
I have a question about the use of the PWC Blue. With the new car it really does not need work so to speak as the paint is pretty flawless already and it already has a great shine and WOW factor already. What i was wondeirng is, would an pass with the PC ( What speed also) and the PWC Blue give it any more shine or would it simply be a waste of time? I then plan to follow that with a coat of the EX. Also since i do not need any cutting to fix any flaws should is use a polishing pad (LC White) or a Finishing pad (LC Black)??

Richard
 
I'd use it.. it works good and will clean up the paint(come on you know it still needs it OCD man) polishing or finishing pad at 4-5
 
I did on my new truck IIRC I used a finishing pad on 4 and then one coat by hand 2 coats of EX and one coat of nattys blue.
 
IIRC = If I remember correctly....

I like PwC because it'll polish the paint a little bit, clean it up and leave it ready for LSP. It isn't quite necessary but I believe that the results would be worth it.
 
I put the PB products on this new VW GTI of mine:
wash
clay
pwc blue
ex-2 coats
IMG_00432048x15365-28-0612-38-12PM5.jpg


Her's a pic after I put Natty's blue on top of the above process- one coat so far:

IMG_0010.jpg
 
You must log in or register to reply here.
Back
Top