Black Evo IX detailed!

T

Tripperfx3

New member
This was my 1st black car and I think it turned out really good! This was a full correction detail and took me about 8 hours. Heres the process:



- Wash with Optimum No Rise Wash

- Clay with Adams clay using ONR as lube (real time saver!)

- Polish with Menzerna Intensive Polish w/ orange light cutting pad

- Polish with Menzerna Nano Polish w/ white polishing pad

- Menzerna Finishing glaze w/ blue pad

- Collinte 845 w/ grey pad

- All above done via UDM

- While wax was curing interior was wiped down with DP interior cleaner and DP surface protectant

- washed again with ONR to remove dust from polishing

- Wheels treated with DP wheel cleaner



Befores:

JustinsEvoIX002.jpg


JustinsEvoIX003.jpg


JustinsEvoIX001.jpg


JustinsEvoIX004.jpg




Afters:

JustinsEvoIX005.jpg


JustinsEvoIX006.jpg


JustinsEvoIX007.jpg


JustinsEvoIX008.jpg


JustinsEvoIX009.jpg


JustinsEvoIX010.jpg
 
damn how do you do it so fast with the UDM? It would take me more then 8 hours just to polish my car with pb's ssr 2.5 and 1.0 with the UDM.
 
Thanks all!



Slickrsx: I started out on my test panel with SSR 2.5 as I had great results with it on my Evo, but I wasn't getting the results I wanted. I then switched to the Menz. IP on an orange pad followed by the Nano Polish and it worked great. To be honest it probably would have only taken me 6.5 hrs, but there were guys from my car club there and they kept asking me questions. That and it was 92 degrees out and had to stop for water quite frequently lol
 
You must log in or register to reply here.
Back
Top