before using the SSRs

R

RedLight_Si

Rev-happy
I will be trying the SSRs soon. I have a single coat of Zaino on my car right now. Should I maybe wash my car with Dawn before using the SSRs? I dont really like to do this but I dont want the Zaino to contaminate or interfere with the SSRs when Im working them. What do you think?

Steve
 
I think you'll be fine to just jump right in polishing... after a good washing and drying of course. You won't have any problems with the Zaino the SSRs will just eat that up with no harm.
 
There's no need to use Dawn. Just wash using a dedicated car soap, then go ahead with the SSRs.
 
Polishes will break down the wax. If you are concerned, get a wax & silicone remover. Takes about 20 minutes.
Leave Dawn on the shelf.
 
Thanks everyone for the replies. Its hasnt been clayed in a while. I dont remember how long ago I did it. Ive worked it with Z:PC about 3 times over very recently though. The finish feels very smooth. But there are still swirls. Im gonna go ahead and wash the car with SSS,dry and then work the SSRs. Hopefully I can finally get all the swirls out. I hate'em.

Steve
 
With a PC, purchase some patience when you pick up your SSR package. Really work that product in.
Also, put some damp clothes at the top of the hood below the windshield. There is some dust kick up, and cleaning those grooves can be annoying. But make sure your PC doesn't grab the clothes.
And ear plugs and a nice sandwich, cause you have a day ahead. For SSR, I recommend a BLT.
 
good advice on the damp rags...haven't thought about that one...

yes the pc can do the job, but it takes longer than a rotary, more passes and using the right product/ pad combo ...I prefer a hot meatball hero:D
 
Poorboy said:
good advice on the damp rags...haven't thought about that one...

yes the pc can do the job, but it takes longer than a rotary, more passes and using the right product/ pad combo ...I prefer a hot meatball hero:D
Click to expand...

With a long day of PC action, I'd just hate to see the meatballs coming back on him! :alucard:
 
totally agree with the damp mf theory, although I'm always touching one with a pad and sending it flying across the lawn. it's hilarious but only for the first half a dozen times, so I started popping the hood and taping a couple of plastic trash bags over the wipers and molding.

for an initial attack with ssr's I'm gonna have to go with the blt, cause bacon makes you mean.
 
Don't worry about the zaino ssr's will cut right thru them after you use the ssr's and before you put the zaino back use the z-pc instead of the ssr1 then put the zaino back on. with zfx this way you can put 3 coats on in the same day :yes: I have 20+ coats of zaino on my car.
 
You must log in or register to reply here.
Back
Top