TQB
New member
Is it a good idea to hit the paint with some UGE before applying the 2nd layer or is it better to just use the UPP?
Before 2nd layer of UPP??
- Thread starter TQB
- Start date
kimwallace
New member
I just apply the UPP ... as of yesterday 3 coats.
I am stopping there cause between 2 and 3 there was only the slightest improvement.
I am stopping there cause between 2 and 3 there was only the slightest improvement.
TQB
New member
Yeah I am gonna put my 2nd on tomorrow then probably 3rd next saturday then top it with Trade Secret next sunday.
Did you see a big difference between 1 and 2?
Did you see a big difference between 1 and 2?
kimwallace
New member
Yes I did and I have in the past.
I have started applying my second and third coats with a PC and that really spreads the product thin.
I have started applying my second and third coats with a PC and that really spreads the product thin.
rabbi
The Whaler Loves Detail City
Before putting another layer of UPP on my car I washed it. Haven't tried UGE yet.
It is likely your question refers to applying the UPP on a clean surface. If it is still clean, then IMO the UGE isn't necessary.
If the vehicle stayed in the garage until the second coat, then all I did was apply and remove the UPP.
When I have had to drive it between coats, I either used UGE, S&W, or washed it. Depended on how dirty I felt it was.
What usually happens is that the second coat won't get applied until the next wash because of using the van so much.
Charles
If the vehicle stayed in the garage until the second coat, then all I did was apply and remove the UPP.
When I have had to drive it between coats, I either used UGE, S&W, or washed it. Depended on how dirty I felt it was.
What usually happens is that the second coat won't get applied until the next wash because of using the van so much.
Charles
ron
My business is detailing
I applied my third coat of UPP Friday, March 26 and it looks fantastic. I did as Kim and applied it with the PC. Before applying, I use QD to remove the dust because it was not dirty, only dusty.
B
Boss_429
Guest
TQB,
Knowing that your truck is a daily driver, I would wash, and/or Spray & Wipe, and do the UGE thing before adding another coat of UPP. There's nothing wrong with making "extra" sure that the paint surface/previous coating is as clean as possilble.
Knowing that your truck is a daily driver, I would wash, and/or Spray & Wipe, and do the UGE thing before adding another coat of UPP. There's nothing wrong with making "extra" sure that the paint surface/previous coating is as clean as possilble.