2013 Audi S8 and 2011 Porsche Boxster. The owner recently did the factory pick-up on the S8 so I wasn't sure what to expect but it appears everyone got the message to keep their hands off the car because it was in great shape. Porsche was as well, its a weekend toy so it isn't driven much.
ONR wash, Opti-Raser pink to clay
Optimum Hyper Polish using an Optimum MF cutting pad and Rupes 21 DA polisher
Optimum Opti-Seal
Armor All on tires/wheel wells













-----------------
2005 Porsche Carrera Turbo S. Also has the GT3 suspension. Pretty cool car! Owner recently picked it up from a dealer in Illinois and wanted the car brought up to the level it deserves. Had light to moderate spider swirls, some holograms on the driver's door. Hard to pick up swirls on a white car with the sun peaking out here and there (didn't full clear up until I had finished) so only a couple shots actually showed anything:


After Meguiars M100:

Full process:
ONR wash, Opti-Raser pink to clay
Meguiars M100 using an Optimum MF cutting pad and my Rupes 21 DA
Optimum Hyper Polish mixed 50/50 with Optimum G-P-S and an Optimum MF cutting pad and Rupes 21
Optimum Opti-Seal
Armor All on tires/wheel wells
Why mix OHP and G-P-S? M100 was sticking a bit to the paint, G-P-S is very effective at removing said residue but felt the step needed a touch more cut following M100 so I used a spritz of OHP as well. Worked very well, excellent finish and the added slickness made Opti-Seal easier to use.











ONR wash, Opti-Raser pink to clay
Optimum Hyper Polish using an Optimum MF cutting pad and Rupes 21 DA polisher
Optimum Opti-Seal
Armor All on tires/wheel wells













-----------------
2005 Porsche Carrera Turbo S. Also has the GT3 suspension. Pretty cool car! Owner recently picked it up from a dealer in Illinois and wanted the car brought up to the level it deserves. Had light to moderate spider swirls, some holograms on the driver's door. Hard to pick up swirls on a white car with the sun peaking out here and there (didn't full clear up until I had finished) so only a couple shots actually showed anything:


After Meguiars M100:

Full process:
ONR wash, Opti-Raser pink to clay
Meguiars M100 using an Optimum MF cutting pad and my Rupes 21 DA
Optimum Hyper Polish mixed 50/50 with Optimum G-P-S and an Optimum MF cutting pad and Rupes 21
Optimum Opti-Seal
Armor All on tires/wheel wells
Why mix OHP and G-P-S? M100 was sticking a bit to the paint, G-P-S is very effective at removing said residue but felt the step needed a touch more cut following M100 so I used a spritz of OHP as well. Worked very well, excellent finish and the added slickness made Opti-Seal easier to use.










