Aquawax & WW towels

Jesstzn

Jesstzn

New member
I tried doing a search but didn't have any luck .



My question is if your applying Aquawax to a wet surface then drying/buffing it off is it going to have an adverse effect on your M/F WW drying towels? The residue from it has to go somewhere.
 
Well, like all other waxes and sealants, you need to use your MF or WW towels to remove the product. Just clean it thoroughly afterwards.
 
mikebai1990 said:
Well, like all other waxes and sealants, you need to use your MF or WW towels to remove the product. Just clean it thoroughly afterwards.
Click to expand...





Thing is I don't used my WW drying towels to remove sealants .. I use them for drying ..
 
I personally would dry it down and use the AW as a wowo product like a QD , thats what works best for me .
 
I'd also use the AW after the car is fully dried off, unless you REALLY have time constraints. At least dry off most of the water before you put on the AW. You will be able to get the full protection and shine of AW.
 
I haven't used AW but I found that using any WAUD product with WW wrecks them. I had to junk two WW before the penny dropped. I've tried everything to bring them back but to no avail. I know some have had no problems, but many others, including myself have had problems.



I'd play it safe and follow the above advice. Quickly dry the car, then use AW with a regular MF.
 
Alfisti said:
I haven't used AW but I found that using any WAUD product with WW wrecks them. I had to junk two WW before the penny dropped. I've tried everything to bring them back but to no avail. I know some have had no problems, but many others, including myself have had problems.



I'd play it safe and follow the above advice. Quickly dry the car, then use AW with a regular MF.
Click to expand...



I also agree , ww=drying , I would not use it as a wax as you try towel as you will never get all of the wax/sealant out of the towel.
 
You must log in or register to reply here.
Back
Top