Hey guys
Being from Australia it becomes very hard to find quality detailing items here and what you can find always has an obscene price markup which is not unlike everything else here. 1.50per litre Fuel / $4 600ml bottle of coke etc etc
Thus myself and quite a few other do regular orders of various items from America. Up untill now I havent really done any O/S detailing orders. So I thought I would put it out there for you guys to say where you would suggest are the cheapest places to buy from over there.
1) Also any feedback on the below order from America would be great (some of this gear you dont find over here in Australia)
2) Also looking for opinions on the Flex XC3401 VRG Dual Action Machine Polisher.
I have 2 Makita 9227CB Rotary units and a chinese knock off of the same machine and have many years experience with them.
But have never really had any exposure to DA,s apart from as Air Sanders in 3 and 6". I thought I could perhaps be finishing better but doing my final polishing steps with some thing like the flex unit.
Benifit or not really ? Elaborate/explain etc
3) We also use a LOT of Compressed air over here and the humble blow gun gets used a LOT. How ever I have noticed you guys have a lot of "Super high flow" varieties over here with a 1/4 inch inlet (couldnt be stuffed changing everything to 3/8 fittings)
Have Narrowed these down to the following all can be had for around $20 us
GUARDAIR XTRA THRUST
ACME AUTOMOTIVE Typhoon Pro
Legacy Cyclone F3 Extreme Flo High Flow Tip
Hope to get some feed back from you guys especially from others who do this for a living.
Thanks for your imput!:yourrock
Being from Australia it becomes very hard to find quality detailing items here and what you can find always has an obscene price markup which is not unlike everything else here. 1.50per litre Fuel / $4 600ml bottle of coke etc etc
Thus myself and quite a few other do regular orders of various items from America. Up untill now I havent really done any O/S detailing orders. So I thought I would put it out there for you guys to say where you would suggest are the cheapest places to buy from over there.
1) Also any feedback on the below order from America would be great (some of this gear you dont find over here in Australia)
- P21S 100% Carnauba Wax $54.99 World Natty’s Paste Wax – BLUE $19.99
- Klasse High Gloss Sealant Glaze 16.9 oz. $19.99
- Cobra Waffle Weave Microfiber Glass Towel $9.99
- Cobra Super Soft Deluxe Microfiber Towels with Rolled Edges, 6 Pack $17.99
- Cobra Supreme 530 Microfiber Towel Trio $29.99
- Cobra Microfiber All Purpose & Wheel Detailing Towel $5.99
- Aquapel Glass Treatment & Rain Repellent $7.99
- Cobra Super Plush Deluxe Microfiber Kit $24.99
- Meguiars NXT All Metal Polysh $8.99
- Laitner Grip-It Vent & Dash Duster $2.99
- Lake Country Flat 6.5" Foam Pads Buy One, Get One Free!
- Pad 1 : Yellow
- Pad 2 : Orange
- Pad 3 : White
- Pad 4 : Light Green
- Pad 5 : Green
- Pad 6 : Red
- Pad 7 : Blue
- Pad 8 : Grey
$40 - Rotary 4 ¾ inch Flexible Backing Plate $16.99
- Meguiars WWHC7 Solo Wool Heavy Cutting Pad 7 inch $12.99
- Klasse ALL-IN-ONE Polish 10 oz. $14.99
- Meguiars Mirror Glaze #205 Ultra Finishing Polish 32 oz. $27.99
- Meguiars Mirror Glaze #105 Ultra-Cut Compound 32 oz. New D.A. Version $25.99
- Mothers Ultra-Soft Microfiber Applicator Pads $2.99
- Meguiars Unigrit Professional Hand Pad $13.99
- CarPro Ceriglass Glass Polish 500 ml. $17.99 1
- Griots Garage 6 Inch Glass Polishing Pads, Set of 3 $14.99
- Lake Country Wool Pad Spur $7.99
- German Upholstery Brush & Squeegee $12.99
2) Also looking for opinions on the Flex XC3401 VRG Dual Action Machine Polisher.
I have 2 Makita 9227CB Rotary units and a chinese knock off of the same machine and have many years experience with them.
But have never really had any exposure to DA,s apart from as Air Sanders in 3 and 6". I thought I could perhaps be finishing better but doing my final polishing steps with some thing like the flex unit.
Benifit or not really ? Elaborate/explain etc
3) We also use a LOT of Compressed air over here and the humble blow gun gets used a LOT. How ever I have noticed you guys have a lot of "Super high flow" varieties over here with a 1/4 inch inlet (couldnt be stuffed changing everything to 3/8 fittings)
Have Narrowed these down to the following all can be had for around $20 us
GUARDAIR XTRA THRUST
ACME AUTOMOTIVE Typhoon Pro
Legacy Cyclone F3 Extreme Flo High Flow Tip
Hope to get some feed back from you guys especially from others who do this for a living.
Thanks for your imput!:yourrock
