after using DACP,some question?

[Kenji]

DACP remove lots of the swirls.

but, there is still some very light swirls,

do i have to go with some light abrasive product?

 

[Kenji]

AIO and S100 GEPC, which one is more abrasive?

 

[bboy850]

Follow with Meguiars #82 SFP, and if you really want to go overboard then afterwards follow with #81.

 

[Simplistic]

I believe AIO has more cleaners and has chemical abrasives while the GEPC has mechanical abrasives.

 

[2wheelsx2]

Neither of those have any abrasives. They are both chemical cleaners. If you want to do more swirl removal, do as bboy850 suggested and use a lighter swirl remover like #82 or #9. Both good products.

 

[Kenji]

#81 is a filler or cutter?



and



how to determine the amount of DACP to be used?

 

[Jcrawford]

filler

 

[Kenji]

what is the least abrasive cutter (lighter than #82)i can find?

 

[Kenji]

Plus. what is the different between #9 and #82?

 

[shaf]

If you still have "light swirls" after using DACP I don't think you really want something much milder than #9 or #82.



Keep in mind that at this point what you're seeing should be marks left over from DACP causing some marring (especially if you've used a cutting pad). If you still have swirls like the original swirls before you started you might want to use the DACP more next time (try the swirl remover first for now though).

 

[Gonzo]

"what is the least abrasive cutter (lighter than #82)i can find?"



Menzerna FP, IMHO