About to purchase PC

C

Craigmri

New member
Greetings folks!



I recently bought my wife a new Hyundai Veracruz(Metallic Black) and want to do this thing right. I've already clayed and waxed but I'm about to get serious.



The paint is obviously in decent condition however has some minor fine scratches most likely from the dealer using towels instead of microfiber so I want to remove these and bring out the best possible shine.



I am about to purchase a PC 7424 and looking to buy in a kit form. I want to do some intermediate type polishing to enhance the relatively dull Hyundai finish before using a sealer. I want to go with a sealer that can be layered. I am considering going with Klasse AIO then the Klasse sealant. What pads should I be sure to have on hand and is there anyone who will package a kit for me? I'm also thinking if not Klasse maybe the Four star UPP line? Thoughts?



I don't mind many steps as this is a labor of love to detail my cars. Heck if there is a three stage program that would be superior to what I described above I would consider that too.



Thanks in advance for your suggestions.



Craig
 
If you are considering moving up to more advanced processes in the future, it may be wise to invest in a Flex - an orbital polisher that is paint safe but much more powerful than a PC, perhaps 2x as much.



If not, the PC is a very decent choice. I think it would be a good idea to get some Optimum Polish or Poorboys - something to start off with. Get two-three different pads, one polishing pad and one cutting pad at the least.



Here is a basic detail for the enthusiast:



1) Wash using the two-bucket method

2) Clay with proper lubricant

3) Re-Wash & Dry

4) Polish using PC



Step 5 depends on the LSP you would like to apply. If you like the Klasse twins, go for that. If you would like a paste wax, you may apply Klasse AIO at this stage to clean the paint. If you are using another synthetic product, it generally contains cleaning properties - enough not to warrant KAIO's use.
 
The UDM would probably be your best buffer choice, as easy to use as the PC and about 20% more polishing power. The small size makes it easy to maneuver. I haven't used the Flex but I understand it is even more powerful than the UDM.



I second the Optimum polish recommendation. Very forgiving, long work time and no dusting. Just remember that less is more-once the pad is primed, 2-3 pea sized dots are all you need per panel.



If you want an undated and easier to use version of Klasse, look into Werkstatt.
 
Little concerned about the reliability of the UDM...



I am sure DavidB will cover the issues under warranty but it won't be too nice to have an issue outside of that period.
 
Have you been following the threads in the UDM forum? It would be interesting to see how many units have been affected.
 
ptaylor,



First off my cars are all new so most corrections will be relatively minor. Secondly, if I do require a more advance method I do have a rotary I used to use on my boat that I could always go to however there is a huge difference in using a rotary on gelcoat(hard and thick) vs. auto paint(thin and softer) so I'm going PC on the new Hyundai Veracruz.



Craig
 
Craig, I'm glad you have a rotary because eventually you'll need it. Most new cars look great when you first buy them but they don't stay that way. IMHO a p/c works well at applying products like glazes and waxes. Additionally, a rotary brings up the shine much better than a p/c because it generates the heat necessary to break down the polish in a way that the p/c can't. Let me explain it this way, when someone drops by and asks "Hey Pat, will this buff out?" I can assure you, I don't reach for my P/C. There are better choices now. :xyxthumbs



Patrick
 
The more powerful the polisher, the better polishes work and start to make 'sense'.



That being the case, a UDM reportedly having 20% more power will be a better tool for you and make detailing life better for you.



I use to use a PC and, yeah, you outgrow it. I now use a BO6040 and love it. The *only* time I wish for something more powerful is when I have to work on some of those GM super-hard clears.
 
the UDM would be a good choice since as others stated, it has more power than the PC. the flex would also be another great option, but it's sold out everywhere and probably won't be back in-stock till february sometime, but also cost 2X as much. take advantage of the UDM sale for $129.99, and if you enter the "autopia" code, you'll save another 10% off the already excellent sale price which would bring it down to $116.99! Car Polisher, Auto Buffer - The Ultimate Detailing Machine
 
Thanks for the suggestions guys, I ordered the PC already from Coastal Tools. $107 to my door. Ordered the backing plate when I ordered my Sonus pads from Danase.



My plan is to pretty much go to town with Finesse-it II till I cant take it anymore. I have three grades of pads coming so I'll systematically work through the three pads. Most likely I'll hand apply either Zaino or NXT 2.0 when finished. Hope to have pics within a couple of weeks to share.



Craig
 
You must log in or register to reply here.
Back
Top