The owners bought this car approx a year ago knowning full well it was a repaint. Best part about the repaint-nothing-Single stage or it was tinted clear. Soft as heck, a major PITA. Horrible OP on the horz panels, not much better on the verts.
For some reason I never took any before full car pics. :Geezx
Before:
Interior before:
Foamed up with the lance and a mix of 2oz of CGCW, 1 oz of Z7 and water in the quart bottle. Lower panels and front got bug sponge.
Took about 90 mins to clay the car. Overspray on the glass, ect.
This is what the claybar looked like after half of the trunk:
After one pass of presta 1500/green wool/metabo 1500:
Still some RIDS that can not be seen in the above pics.
After 1 pass on 25% of the hood:
The system 2000 pad washer saves the day again. After the hood or 2 of the vert panels, I would wash the wool pad.
Finished out the horz panels with:
Presta 1500/green wool/metabo 1500 x2
3M ultra fina/White CCS/Metabo 1500
Started working on the vert panels and they where worse then the horz panels. The green pad combo was not cutting it. So I moved up to:
3M extra cut/Yellow wool/Metabo 1700-This cuts fast but really hammers the surface on this soft paint.
Then I had to follow with:
Presta 1500/green wool/metabo 1500
3M ultra fina/White CCS/Metabo 1500-With the ultra fina you want to do about 4 passes with pressure and then no pressure at 1100 or so for 2-3 more passes. This removed everything that the green wool left.
So all the vert panels received a 3 step polishing.
I then foamed the car again this time with Z7, quick mitt wash-I can see the oils from ultra fina lifting off of the surface. (rainbow effect in the foam)
I then did:
50/50 wipedown to ensure a clean surface.
2x of ZFX'd Z5pro.
1x of Z2pro
Z8
Wheels:
PB SnR x2 2nd time with Bug sponge.
ZAIO
Tires and wells AM Red Hot APC 1:1-The dirt just starts bleeding out after 30 seconds of spraying it on. Scrubbed with brush.
Glass and black trim got ZAIO PC4 orange pad.
Interior:
Vac
IZ CP on a trim and dash
Z-9/10 on seats
IG on glass
AM 777 APC 1:6 on rubber matts, followed with PB NL.
Paint did have some nice flake in it:
APC will really dry out those rubber mats:
Much better after some PB NL:
For some reason I never took any before full car pics. :Geezx
Before:





Interior before:


Foamed up with the lance and a mix of 2oz of CGCW, 1 oz of Z7 and water in the quart bottle. Lower panels and front got bug sponge.
Took about 90 mins to clay the car. Overspray on the glass, ect.
This is what the claybar looked like after half of the trunk:

After one pass of presta 1500/green wool/metabo 1500:

Still some RIDS that can not be seen in the above pics.
After 1 pass on 25% of the hood:

The system 2000 pad washer saves the day again. After the hood or 2 of the vert panels, I would wash the wool pad.
Finished out the horz panels with:
Presta 1500/green wool/metabo 1500 x2
3M ultra fina/White CCS/Metabo 1500
Started working on the vert panels and they where worse then the horz panels. The green pad combo was not cutting it. So I moved up to:
3M extra cut/Yellow wool/Metabo 1700-This cuts fast but really hammers the surface on this soft paint.
Then I had to follow with:
Presta 1500/green wool/metabo 1500
3M ultra fina/White CCS/Metabo 1500-With the ultra fina you want to do about 4 passes with pressure and then no pressure at 1100 or so for 2-3 more passes. This removed everything that the green wool left.
So all the vert panels received a 3 step polishing.
I then foamed the car again this time with Z7, quick mitt wash-I can see the oils from ultra fina lifting off of the surface. (rainbow effect in the foam)
I then did:
50/50 wipedown to ensure a clean surface.
2x of ZFX'd Z5pro.
1x of Z2pro
Z8
Wheels:
PB SnR x2 2nd time with Bug sponge.
ZAIO
Tires and wells AM Red Hot APC 1:1-The dirt just starts bleeding out after 30 seconds of spraying it on. Scrubbed with brush.
Glass and black trim got ZAIO PC4 orange pad.
Interior:
Vac
IZ CP on a trim and dash
Z-9/10 on seats
IG on glass
AM 777 APC 1:6 on rubber matts, followed with PB NL.




Paint did have some nice flake in it:


APC will really dry out those rubber mats:

Much better after some PB NL:


