#9 micro marring

N

NVcobra

New member
Hi,ive used 83 then 9 an got rid of the main swirls but after 9 i still see the ultra fine marring swirls. I used the Sonus orange pad with 83 then the green pad with 9. Can i further remove the micro swirls?thx
 
Follow up DACP on an orange pad with DACP on a polish pad. Work it until it dusts away and inspect your finish. You may need to make more than one pass with the DACP, and if needed follow up with #80 on a polish pad.
 
i have used # 9 with the PC and the CMA yellow pad. then sealed with NXT. i did not have any problems with the # 9 :nixweiss
 
I think you should try something a little stronger than 9 after DACP, I know SFP is given the same abrasive rating as 9 but I find it to be a little more aggressive, or better yet go with 80 instead of 9 or SFP after DACP and then go to your LSP.
 
You must log in or register to reply here.
Back
Top