4*UPP & 4*Paint Cleaner

P

porterror

New member
I just recieved some samples of these two products. First time using? I'm not totally sure when in my process should I include them.



NXT Wash -> Clay -> AIO -> NXT Tech -> #16



any suggestions on application of these products? and how do they stand against the ones I have?
 
I've not used the paint cleaner. I used AIO before UPP but UPP goes on and comes off very easily. Just apply it thinly, let it cure for approx 45 min and buff off. I would think you could go straight to UPP as soon as your done with the cleaner.
 
UPP goes on very easily. It's very thin and wipes on and off with ease.

UPP > #16 is correct, but after you feel the extreme slickness of UPP, you may not want to put #16 on top. It will take some of the slickness away.
 
Paul is right, you may not want to top UPP after you feel its slickness (which is restored using UGE). Paste Glaz is the only carnauba I've tried that keeps the paint as slick as UPP alone.
 
UPC should be applied just as you would AIO....one section at time, then remove. UPC is VERY user friendly and IMO really has no learning curve.



I like UPC via PC as well as by hand. For me it is just depends on what kind of mood I am in. Obviously if you are using the UPC to remove some mild oxidation or stains, then the PC would be the best choice for application.
 
TW85 HHI said:
Paul is right, you may not want to top UPP after you feel its slickness (which is restored using UGE).
Click to expand...

Is the UGE just used like a QD? Spray on, wipe off? Or does it have to haze, like a spray wax?
 
Since we're discussing some 4* products, can I ask about their Ultimate Swirl Mark Remover? Have any of you tried it? Don't mean to hijack the thread...
 
You must log in or register to reply here.
Back
Top