3D Rinse Free Wash?

philipfreire

philipfreire

New member
I saw this on the 3D Canada Facebook page. I was curious about knowing more about this product. Is it new? Does it replace the Waterless Car Wash? Or is it another product that's rated above or below it?

attachment.php
attachment.php


attachment.php
 

Attachments

  • 11164758_833171736768339_6588256910678972653_o.jpg
    11164758_833171736768339_6588256910678972653_o.jpg
    116.1 KB · Views: 602
  • 11147864_833171773435002_4346469208507897594_o.jpg
    11147864_833171773435002_4346469208507897594_o.jpg
    101.2 KB · Views: 605
  • 419G01_Waterless_Carwash__02236.1406841830.1280.1280.jpg
    419G01_Waterless_Carwash__02236.1406841830.1280.1280.jpg
    74.1 KB · Views: 596
Rinseless is a different method than Waterless.
Rinseless is mixed with a bucket of water. You wash your car with this solution. Then dry.
Waterless comes straight from a sprayer onto your car. You wash your car with just this chemical solution, often using ounces of fluid rather than gallons.

When I think Rinseless, I think ONR.
When I think Waterless, I think UWW+.

3D offers both, and I bet they are as good as those staples I mentioned. They're even similarly colored!
 
philipfreire said:
Oh thanks! Is it wrong to use the waterless as a rinseless ?
Click to expand...
As pwaug said, maybe not! UWW+ works as both! and so does ONR, to some extent, because it has a dilution ratio for QD use.
I like 3D's approach, having a dedicated product for each use. Adams also does this, and several others.
 
After reading the directions on Waterless, there is no mention of any dilution of the product. I think it must be used straight from a trigger bottle. ONR is dilutable.
Therefore I believe this product can't be used as a rinseless.
 
philipfreire said:
After reading the directions on Waterless, there is no mention of any dilution of the product. I think it must be used straight from a trigger bottle. ONR is dilutable.
Therefore I believe this product can't be used as a rinseless.
Click to expand...

Rinse Free, indications says: Mix a 1 ounce of product in 2 gallons of water ...
 
philipfreire said:
Oh thanks! Is it wrong to use the waterless as a rinseless ?
Click to expand...

Absolutely not! I've pretty much replaced ONR with 3D WW as my rinseless wash. I use it the same way/dilution (1 oz to 2 gallons of H20), but I've been pre-spraying the panel down with a mix of 8 to 1 solution. It gives off some very nice hydrophobic action for a little while too.
 
Now that iron remover is out, any updates on this product? I know, im never satisfied. Also how about them beveled pads? Ok im gona stop now.
 
Im saying this nicely. It would be nice to get an update on some of these products. I guess thats the problem with these big companies, no communication.
 
David Fermani said:
Absolutely not! I`ve pretty much replaced ONR with 3D WW as my rinseless wash. I use it the same way/dilution (1 oz to 2 gallons of H20), but I`ve been pre-spraying the panel down with a mix of 8 to 1 solution. It gives off some very nice hydrophobic action for a little while too.
Click to expand...

Could the same be done with HD Touch? I was going to try the Rinseless Wash, but it seems HD Touch might have more to offer. Thanks
 
You must log in or register to reply here.
Back
Top