2018 Jeep Trackhawk - Saskatchewan, Canada - CQuartz Professional

Tyler Hoffarth

Professional Detailer
I was honored to have a new Jeep Trackhawk (6.2l S/C, 707hp) come in for a New Vehicle CQuartz Professional Service.


Here is a list of the services performed:

  • Complete Foam Rinse/Hand Wash
  • IronX, TarX, ClayBar Decon
  • Paint Correction
  • Paint Refinement w/ CarPro Essence
  • CQuartz Professional on all painted surfaces
  • FlyByForte on Windshield
  • Reload on all Glass
  • Hydro2 on Wheels (after a full decon)
  • CQuartz Leather application
  • Gtechniq Fabric Guard Application



Without going into a long list, I primarily use Rupes machines, Meguiars/Lake Country MF cutting pads, Rupes Yellow Polishing pads, and CarPro Gloss pads for finishing. Compound used was FG400, followed by CarPro Essence. Other areas where required had EX-04/06.


Below we see the vehicle in it`s condition upon delivery. Saskatchewan, Canada can be a dirty place to drive!
I also threw in some wash photos.









Here are some photos of the polishing process & results. It was unfortunate to see such extensive damage on a vehicle with less than 950km on the odometer!










And finally, the finished photos:













Thank you for viewing! I appreciate any feedback :)


If you are interested in my full write-up, I have that available on my website as linked below:


www.unleashedautocare.com/jeep-trackhawk
 
I was honored to have a new Jeep Trackhawk (6.2l S/C, 707hp) come in for a New Vehicle CQuartz Professional Service.


Here is a list of the services performed:

  • Complete Foam Rinse/Hand Wash
  • IronX, TarX, ClayBar Decon
  • Paint Correction
  • Paint Refinement w/ CarPro Essence
  • CQuartz Professional on all painted surfaces
  • FlyByForte on Windshield
  • Reload on all Glass
  • Hydro2 on Wheels (after a full decon)
  • CQuartz Leather application
  • Gtechniq Fabric Guard Application



Without going into a long list, I primarily use Rupes machines, Meguiars/Lake Country MF cutting pads, Rupes Yellow Polishing pads, and CarPro Gloss pads for finishing. Compound used was FG400, followed by CarPro Essence. Other areas where required had EX-04/06.


Below we see the vehicle in it`s condition upon delivery. Saskatchewan, Canada can be a dirty place to drive!
I also threw in some wash photos.









Here are some photos of the polishing process & results. It was unfortunate to see such extensive damage on a vehicle with less than 950km on the odometer!










And finally, the finished photos:













Thank you for viewing! I appreciate any feedback :)


If you are interested in my full write-up, I have that available on my website as linked below:


www.unleashedautocare.com/jeep-trackhawk

Looks good my brother ! I love these vehicles


Sent from my iPhone using Tapatalk
 
Back
Top