Just over 2k miles on this big'en.
It has pulled the clients fifth wheel camper once already.
No correction or clay needed. But I had to find a reason to use the metabo.
Before pics, well it is just about brand new.
I used DG 901 carwash soap w/ the foam lance. Not sure what the deal was, I used 2oz to 30oz of water. This is the same mix I use with Z7 and I get allot more foam with the Z7. I double checked the mixture setting and it was set at half as usual. :think:
I did not rinse, but just did a 2 bucket wash with DG 901 soap.
Rinsed down the paint and cleaned the wells, wheels and tires with AM Red Hot APC 1:1. I need to pick up another gallon of this great APC and at $10 a gallon, I will pickup two of them. Rinsed all the above areas with pressure washer.
I decided to use ZAIO as I really like the way it looks on darker colors, even if I am going to use ZFX.
So I got out the metabo, a white LC VC pad and worked the ZAIO in at 1300 or so on all the paint, glass, black and chrome trim.
I then applied 2x of ZFX'd Z5pro.
Applied one application of CS and finished with Z8.
Interior got a quick vac and wipedown.
Tires got 1x of Z-16 and wheels got ZAIO.
Afters:
It has pulled the clients fifth wheel camper once already.
No correction or clay needed. But I had to find a reason to use the metabo.
Before pics, well it is just about brand new.
I used DG 901 carwash soap w/ the foam lance. Not sure what the deal was, I used 2oz to 30oz of water. This is the same mix I use with Z7 and I get allot more foam with the Z7. I double checked the mixture setting and it was set at half as usual. :think:
I did not rinse, but just did a 2 bucket wash with DG 901 soap.
Rinsed down the paint and cleaned the wells, wheels and tires with AM Red Hot APC 1:1. I need to pick up another gallon of this great APC and at $10 a gallon, I will pickup two of them. Rinsed all the above areas with pressure washer.
I decided to use ZAIO as I really like the way it looks on darker colors, even if I am going to use ZFX.
So I got out the metabo, a white LC VC pad and worked the ZAIO in at 1300 or so on all the paint, glass, black and chrome trim.
I then applied 2x of ZFX'd Z5pro.
Applied one application of CS and finished with Z8.
Interior got a quick vac and wipedown.
Tires got 1x of Z-16 and wheels got ZAIO.
Afters:
