2007 Mercedes S550 4matic Full detail!!!!

[imported_NJDetail]

We did this S550 right after doing an e350. This S was filthy! She came out flawless! Comments please!!!



Products:

Wash:

Chemical Guys maxi suds II

gilmour foam gun

Sheepskin mitt



Wheels:

megs Super Degreaser

megs wheel brightener



Wheel Wells:

megs super degreaser

megs apc



Drying:

microfiber waffle weave

Cobra Waffle weave











Polish:



Menzerna po85rd on white pad

Meguiars 7 Show Glaze



Wax:

Collinite 845



Interior

Automagic leather cleaner

Meguiars d180 leather cleaner/conditioner

Meguiars Apc





Dressing

automagic xp cool blue on tires

automagic clear shine on plastic



QD

Megs last touch



Clay

Meguiars white clay bar



Tons of rags!!!!

Filth!!

Foam!!!

Tar remover!

 

[AspenF150]

Nawice man!! x10 that clay bar and those wheels looked pretty trashed.

 

[widyhs]

Nice turnaround. Did you experience any micromarring with white pad? I used po106 on my black clear and it left some fine micromarring. Had spoiledman clean up the scratches using soft green lc pads on 106. He told me the white pad was to rigid for the ceramiclear to use with 106f.

 

[DigitalN.]

How come you apply the tire dressing before the paintwork is done?



Car looks great though!

 

[somebody]

Nice work, the paint looked great under the garage lighting.



Brandon

 

[imported_NJDetail]

i always apply dressing prior to any black surfaces so if any polish or wax get on them its easy to remove. i also applied another coat of dressing last. No micromarring with the po85 and white pad. the polish is to fine and the cermiclear is hard, i even have done po85 on a white pad on my jet black bmw and it still comes out perfect!

 

[imported_MBenz]

Nice work. Those wheels were DIRTY.

 

[BigAl3]

nice job , i bet it's cold where you're at...

 

[baseballlover1]

1st of all; looks pretty good.



2 however, i would like to point out that your washing techniques are not correct. Instead of going around in circles which (if there is any dirt trapped beneatht the mitt) will create circular swirls as supposed to up and down swirl marks which are less noticeable. So make sure on vertical(doors) panels you go up and down.



Hope that helps,

Dan

 

[baseballlover1]

Btw, i know how cold it is in NJ... im in edison right now.

 

[DetailersDomain]

dam its too cold to be doing cars outside...



nice work!

 

[imported_NJDetail]

was around 33 when we washed it