This is the first time using a porter cable. I am somewhat of a perfectionist, so I will readily admit that it needs more work. You can't tell from the pictures, but there are still swirls to remove. I'd say I got 50-80% depending on the spot. I think I might need some more abrasive pads for next time.
It wasn't all negative. I was pleasantly surprised by the KAIO, and then made happier by applying NXT 2.0 on top of that. I used Meguiar's because I had leftovers.
Here's what I did:
-wash with Meguiar's Gold Class
-clay with Meguiar's kit
-polish with Menzerna SIP, 4" ccs orange pad
-polish with Menzerna Nano, 4" ccs white pad
-seal with KAIO, wipe on/off by hand
-wax with Meguiar's NXT 2.0, 6" ccs red pad
WashClayPolishWax - a set on Flickr
EDIT:
Keep an eye out. I'll be doing a comparison of Lexol and Leatherique on my back seats, which are nasty dirty... my guess is that I will end up applying Leatherique process over the Lexol cleaned spot anyways
It wasn't all negative. I was pleasantly surprised by the KAIO, and then made happier by applying NXT 2.0 on top of that. I used Meguiar's because I had leftovers.
Here's what I did:
-wash with Meguiar's Gold Class
-clay with Meguiar's kit
-polish with Menzerna SIP, 4" ccs orange pad
-polish with Menzerna Nano, 4" ccs white pad
-seal with KAIO, wipe on/off by hand
-wax with Meguiar's NXT 2.0, 6" ccs red pad
WashClayPolishWax - a set on Flickr
EDIT:
Keep an eye out. I'll be doing a comparison of Lexol and Leatherique on my back seats, which are nasty dirty... my guess is that I will end up applying Leatherique process over the Lexol cleaned spot anyways
