1997 honda accord se detail

roadmaster_tx

roadmaster_tx

New member
worked on this car for around 4 days, had to do the car in panels, used a pc to remove the swirls. Got all the swirls out but the car had alot of deep scratches from previous owner that i didnt wanna get out since they would have had to be wetsanded.
DSCN1362.jpg

DSCN1365.jpg

DSCN1369.jpg

DSCN1366.jpg

DSCN1356.jpg

DSCN1361.jpg

process used was
wash
clay
polish, used 3m swirl remover, used a cutting pad first then went over with a polishing pad.
z5*3
z2
hope yall like it
 
thanks for the support guys. I was actually trying an experiement today and that was to lay down megs show car glaze#7 on top of what i already had which was around 4 coats of zaino.. IT actually didnt do n e thing.
Have any yall tried glaze after using sealant to get that super wet look.
thanks
 
you can do that.. you might want to be careful though as the glaze migth remove the sealant. Its not very common around here to top a sealant with a glaze becaseu the durability is very poor, I have heard of it at car shows though.

Greg
 
GregCavi said:
you can do that.. you might want to be careful though as the glaze migth remove the sealant. Its not very common around here to top a sealant with a glaze becaseu the durability is very poor, I have heard of it at car shows though.

Greg
Click to expand...
really? even tho the sealnt had been on for couple of days? .. But hte werid thing is that i applied the #7 to the left fender and half hte hood, once i was done i couldnt tell the difference. Maybe it was the way i applied it
i applied it just like it said..i used a polishing pad, once i applied it, i buffed it off with the microfiber bonnets.. and nothing
so i dunno, i might have to go return that bottle of megs 7.
wat do yall think?
 
You must log in or register to reply here.
Back
Top