pontman43
New member
This is my other Uncle's car. It has about 30K and has only been washed via swirl-O-matics (lives in LA). I gave him about $40 worth of car care supplies to use to keep it up after I was done (hope he uses it). It has a Eibach Sport kit, wheels and some other things on the way. The paint on this was very, very hard. Once again supplies were limited, only had 1 WW and 3 terry weave MFs left. Man am I tired! Between this and playing with my little cousin constantly (darn kid has unlimited amounts of energy lol), gotta love family though.
Process:
Washed with NXT
Polished with OCP and orange pad on spd 6
Sealed with CGs Extreme Top Coat Sealant (hides quite a bit of swirls)
It didn't come out 100% but pretty good, most of the swirls were hidden by the sealant than anything else. I gave up on deep polishing because the OCP and orange pad working really really slow and using at least 20lbs of pressure did almost nothing to the swirls. Thats why I say the paint was very hard. I wish I knew that so I could have brought OCC instead. It took out enought to be able to see the slight metalic flake in the finish.
I took some cooler pics but I shook a little. (didn't have room for a tripod and was in a hurry before the sun went down).
Process:
Washed with NXT
Polished with OCP and orange pad on spd 6
Sealed with CGs Extreme Top Coat Sealant (hides quite a bit of swirls)
It didn't come out 100% but pretty good, most of the swirls were hidden by the sealant than anything else. I gave up on deep polishing because the OCP and orange pad working really really slow and using at least 20lbs of pressure did almost nothing to the swirls. Thats why I say the paint was very hard. I wish I knew that so I could have brought OCC instead. It took out enought to be able to see the slight metalic flake in the finish.





I took some cooler pics but I shook a little. (didn't have room for a tripod and was in a hurry before the sun went down).