Search results

I bought a "test" kit of 3 of their "super" microfibers it was 7 bucks for three towels which is such a bargain. They were 500/gsm weight which is about normal for the higher end of towels. These towels are amazing, I washed them and started using them today and they are on par with the cobras...

Has anyone tried the new DP poli-coat sealant?? It is supposed to last much longer than most sealants also with some kind of anti-static formula. I am a big fan of Zaino as my sealant and that is the only true sealant(non hybrid) that I have ever used. So with this DP sealant maybe I will switch...

I was never a user of glaze but after doing some research I decided to give it a try since the DWG is no longer out I went with #3 over #7 because #3 is supposed to have much less of an oil residue left over. Here is my question it is such a big topic is a glaze a pre or post wax item...

I used some Optimum Final Polish for the first time today and it did ZERO, NOTHING. I used OC,OP then Optimum final polish with a LC CCS white pad and it did nothing, I could of just finished with Optimum Polish because it did not amp up the gloss or anything. I had the paint 99% free of swirls...

I was searching to see if the normal Cerium Oxide powders/liquids will take out those tiny tiny pit marks in the windshield from driving on the highway. Every where I read they just mention scratches and scuffs so can I remove these pit marks from the windshield so I can actually see when I am...

I've got a 02 elantra GT and it had some paint work done before I got it and the half assed body shop that did the work did a pretty good job on the paint but when they buffed out the paint they did not tape off the rubber molding around the windows. This rubber is a weird type of rubber and now...

I read everything on the package and cans I got to do my floor, its a two part epoxy. If it says clean up with thinner and xylene it is not a water based product correct? It did not come with a clear so can I use any non water based clear epoxy over it? Also can you buy those...

So I ordered Aerospace 303 protectant, and the fabric and vinyl cleaner. Now my question is what exactly can you use the fabric and vinyl cleaner on? Reading the autogeek page on it, it sounds like you can pretty much use it for/on anything. Can you clean your engine bay with this even the metal...

What is the difference between the Nattys Regular, the Nattys Blue and the Nattys Red wax. They say nothing that makes one differ from another in the desciption, but I have heard that the blue looks better on darker colors... Is this true and what are the major differences?? Thanks...

So im going to be buying a Foam gun in the next few days, but my question is do they all spray the same thickness of foam or does one spray a thicker frothier foam than another. Gilmour makes enough foam guns to make your head spin. I do not want a foam cannon as bringing out the power washer...

OK so I polished my car like normal took out all swirls and RIDS put on 2 coats of Zaino Z-2 Pro then a coat of Natty's Blue. This was about 2 weeks ago. Now my question is can I put another coat of Zaino or any sealant for that matter or it will not stick since I have a coat of nuba Wax on...

I am looking to get a Clear Bra for my new car. I can not make up my mind on which on to go with though. Anybody that has one is there any pros/cons from one make to the other? Also did you do it yourself or have someone install it? How much did you pay to have it installed? And my last...

Ok, I have a 2008 Tiburon with 8,000 Miles on it and the front of the car looks like it was sand blasted then it has the normal .050-.100 of an inch diameter rock chips. It has around 20-25 of the bigger ones which I feel is a very large number for such a new car.? I do not drive on Highways...

Is there a chart somewhere that shows which brands of clay are softest to hardest. Right now I have the Zaino clay, Mothers Clay, and Meguaires Clay... Does anyone know in which order those would be in from soft-hard... Also how do those compare to other brand of clay? Thanks,

I have heard in the past that sanding with 800 grit on a DA is like using 3000-4000 on a block by hand... Is this really true? I have done tons of Wetsanding but only by hand, Ive never used my Pnuematic DA for wetsanding. So is this true that using 800 wet or dry on a DA is like using...

I was in my local Auto store the other day and noticed Mother's came out with a few new "Powerball's". They are for paint and one for scratch removal I believe. I am just wondering if anyone has used one of these before on paint. Maybe it could be used instead of a PC on a car that only has...

If I were to wetsand with 3000 or even 4000 do you think that the Zaino PC on a Yellow LC CCS smart pad with a PC would take all of the scratches out. Or am I going to have to go to a wool pad. I also have light cut compound that I could try with the yellow pad as well... Do you think either of...

I recently bought some 100 percent cotton towels from linens and things, brand name Supima Soft Towels they are made in the USA. Just wondering if anyone has ever used these for washing/drying/buffing/putting on/taking off wax or anything else on paint. Also I picked up a 14 pack of...

I have a set of centerline telstars that look basically like ProStar Wheels. They are polished aluminum with NO clear coat on it. They had HEAVY oxidation on them so I polished them with Mothers Power Metal Polish. They look a hundred times better except in certain light you can see scratches...

Hi I was just wondering which backing plates and pads will work for a Pneumatic DA made for sanding. Could someone please post a link for whatever I may need for this to work. I have used PC's for years but never bought one of my own and already have a DA made for sanding so I want to use it to...