Search results

The car had been repainted a few months ago.The painter wanted to remove the orange peel from the hood,roof and the trunk of the car The results were terrible.... The rest of the car had only some swirls The process was Meguiars Diamond Cut on Megs 8'' wool pad on rotary Meguiars #83 on...

The car had only some light swirls,except of the rear side parts that they were heavy swirled... The process was Clayed with Mother's clay bar, Polished with LC polishing pad and Menzerna RD3,02 on UDM On the heavy damaged areas Yellow 4'' pad was used and RD3,02 on UDM followed by the same...

DWG X 1 Dodo Supernatural wax X 1 ENJOY

The brought me this old lady to bring her back in life because the owner wants to sell it to by an other old model of Ferrari... The process so far is Mother's claybar Meguiars Diamond Cut on wool cutting pad on rotary Meguiars Diamond Cut on PFW on rotary Meguiars #83 on Orange cutting...

Clayed with Race Glaze claybar swirl removal with #80 on white LC polishing pad with UDM finishing with Sonus Paintwork cleanser on black LC finishing pad with UDM FK1000P X2 BEFORE some 50/50

ONR WASH as the weather was awful with to much rain wind and cold Raze Glaze Claybar Defect removal with M#83 on white LC 5'' polishing pad with UDM Finishing with M#80 on black LC 6'' finish pad with UDM DWG X 1 FK1000P X 1 Total time 10 hours Before...

The process was claying with Race Glaze clay bar Menzerna RD3.02 on 5'' LC Yellow cutting pad with UDM Meguiars #80 on white polishing pad with UDM Meguiar's NXT liquid wax by hand Some deep scratches were not removed completely though as i want not to risk to remove too much CC and damage...

The process was Claying with RaceGlaze clay bar Meguiar's #83 on white LC polishing pad on UDM Meguiar's #80 on white LC polishing pad on UDM Meguiar's NXT as LSP All the plastics dressed with Meguiar's trim dressing Tyres dressed with Meguiar's Endurance tyre gel BEFORE...

The process was MENZERNA 85RD3,02 ON ORANGE LC PAD WITH UDM MENZERNA 85RD3,02 ON ORANGE LC PAD WITH ROTARY on deeper scratches(the entire left side of the car) 3M finishing polish with UDM on white LC polishing pad POORBOYS blackhole glaze on finishing pad FK 1000P as LSP SO RELAX,TAKE...

Hi guys.I am going to do an Audi S5 tomorrow with a serious damage on the one side..It had been repainted and there are scratches under the paint.Is there any chance to do something to save it?? Here are the best pictures i took Thanks guys...

The process was ONR wash clayed with raceglaze clay bar Correction made with Menz 85RD3,02 with Orange light cutting pad(5,5'' and 4'') Followed with Megs # 80 on white polishing pad Finished with Poorboys black hole glaze on black finishing pad,as it contains cleaners to prepare the...

The process was clayed with raceglaze claybar Swirl and RIDS removal with 4'' LC yellow cutting pad and Meguiars Diamond Compound on UDM Menzerna 85RD3,02 on Orange LC 5,5'' light cutting pad on UDM Meguiars #80 on White LC 5,5'' polishing pad on UDM NXT as LSP SOME RANDOM BEFORE...

I used: Menz 85RD3,02 ON LC CUTTING WOOL PAD with rotary Menz 85RD3,02 ON PFW with Rotary Menz 85RD on polishing pad with UDM KAIO by hand DWG X 1 FK2180 X 1 AG HDW X 1 ENGINE BAY CLEANED WITH ONR WASH AND DRESSED WITH CARTEC ENGINE DRESSING WHEELS CLEANED WITH KAIO AND SEALED WITH...

Something strange happened today...A third person told me that some of my customers were complaining about my prices,but they are more than 100% happy with the results....The most strange is that ALL OF THEM are super car owners,and they asked for the job without asking how much it will...

There were some swirls on the car and i found time to clean it a little bit... I used RACEGLAZE CLAY BAR SONUS SFX-3 on RED SONUS PAD on UDM Sonus Chrome and glass polish on rims FK-1000P as LSP ENJOY

First of all i would like to thank all of you that helped with ideas on how to remove those RIDS..Two days spent on that car...Very very hard CC,lots of RIDS and swirls... The process was Clayed with Megs Clay bar Meguiars Diamond Cut on Orange LC pad with rotary Meguiars # 83 on white LC...

Hi guys....I started today to work on a red Corvette with A LOT OF RIDS.....The CC seems to be very very very hard....The body is made of fiberglass if that matters....I tried almost everything i have without having the wanted results...I used Megs wool pad on rotary with Menzerna Power gloss...

Sorry if it is a repost YouTube - Stupid Woman

Stray Dog Help - CORSA-C|UK read atleast until pg2

As this is my 1000th post i would like to post some cars that i have done on 2008,and to thanks all of you that helped me to be what i am now.... Enjoy.... BMW M3 Lamborghini Gallardo F-308 GTS F355 Spider F360 NOBLE NISSAN SILVIA...