Search results

Hey guys, im buying a PC. It already comes with a backing plate to fit 6inch pads, but i was told by my local supplier that the 4 inch pads offer a lot of correcting ability, even tho it may take a bit longer. Im torn between the two. Should I just get some new 6 inch pads or should I...

I recent;y got some zaino and really like it. I've always used megs UQD to remove light road contaminents and dust with good success. My question is, can I keep using the UQD despite the fact that I have zaino layered on the car? I know that all Zaino products are meant to work with each other...

Well as you guessed it, I dont have a garage :cry: I have a black 99 WS6 that has 22,000 miles and only gets driven on nice, dry days in the summer. I was just wondering if anyone else here has had good success in terms of leaving their cars covered outside? I use a really expensive, 4 layer...

I bought this a few days ago to see how it would work after reading a couple times that it doesn't sling and offers a deacent shine. I must say I was dissapointed. I did one tire just because I wasn't a 100% sure on the whole "no sling guarantee" factor. Sure enough after driving for 20...

Unfortunately, I dont have a garage :( so I have to resort to either borrowing someones garage for a few hours or utilizing my shade that is produced by the trees that are around my driveway. What im asking is if this is OK? I have a black WS6 I'd like to polish sometime soon. The car isn't in...

I am about to cut/polish my black WS6 and wanted to try a sealent after im done. I have two choices that are both available locally. Zaino on one side and Klasse on the other. What would you guys say would give me better protection and shine? This car doesn't see rain or any other bad...

Hey guys, Im about to polish a buddies 86 VW Jetta that has single stage red paint. I was gonna use my makita along with the menzerna IP and FP to bring out the shine in the car. I've never done a single stage before and was wondering if I can even use these products or will my pads get ruined...

Or should I polish the paint and then touch up the minor rock chips I have on the front end of the car? It is a black car and i was thinking of using a toothpick to go over the light chips. Any ideas?

For removing wax residue. I always seem to get some light hazing after removing some wax residue off of my black paint. So, I went out and got these new plush MF towels that have two sides to them. One side is plusher and heavier, very soft. The other is a bit thinner with the fibers much...

Cmax wants 122.00 dollars for a 3M packing plate ($64 and change) and $20.00+ per pad which IMO is a rip off! Is there any other place on this side of the border that is more reasonable. The guy wouldn't accept a cash offer (which he has done before)

Im using Menzerna Final Polish along with a 3M white finishing pad and was wondering which speed do you guys recommend based upon the info i've given you above? I have yet to try out this particular combo and was wondering what you experts have to say. Thanks a lot!

Im not sure where to exactly place this but someone recommended to me that I use flat black with a toothpick, or any other fine tip to touch up minor stone chips on my car. He said that its going to be less visible this way. Any thoughts?

Hi guys, Im running low on the ultimate quick detailer and was wondering if I should try out the Quick Wax Megs offers? I drive the car two-three times per week and when not driven it stays covered up in my driveway so its always clean. If I wash it today, for example tomorrow Ill uncover...

Where do you go for when shopping for some nice quality MF towels (LOCALY) Canadian Tire has release this new, plush MF towel, comes in a pack of two and its yellow/sand in color. Havent tried them yet. They are much thicker then your ordinary CT ones.

I recently bought a new 9227 Makita Rotary and have two brand new bottles of Menzerna IP and FP and would like to know if I can use the orange and white pads that I may already have laying around? I used this combo with good success on my old PC but not sure if I can still use this combo with...

Hey guys, I've been using Lexol so far but curious to try something else. The seats are in good shape, and this leather as many of you probably know is pretty thick and seems to be coated with something out of the factory. It seems as everytime I apply Lexol, it doesnt penetrate all the...

Hey guys, Im new to the Zaino and plan on getting it very shortly, but first Id like to ask you experts what I need, and what I dont need out of their massive line up. My paint is very good, minimal swirling or marring of any kind. Basically all Im asking is, considering my paint is good...

Hey guys, Are there such products out there to help with dust contaminents to maybe help a black car remain a bit cleaner? I have a black car and no garage, I have a car port in the planing for the near future. I heard a little bit about some "anti static" products that are suppose to be...

Hi guys, Im looking for a hand here. Shopping for a Makita polisher and would like to see what the best deal is out there. I found a local one for 186 bucks and this is just the machine its self. No pads, No backing plate.

Just wondering if anyone else here upgraded from a PC7424 (or any other DA) to a rotary polisher and was happier with the results? I have a friend that highly suggests I upgrade to the rotary style polisher due to it producing better results. I see what he's saying tho, because the PC doesn't...