Recent content by William_Wallace

I’m pretty interested in Hercules 3401 I can’t get a photo to upload it looks sexy not sure on price $130 that a big difference. anyone else interested

I have some coating on vehicles in range of 12 month-18months. With slight swirl and washing mars. Usually I put gyeon cancoat or adams spray advance coat with slight improvements. I’m looking for filling. Essence plus works but you have to polish it in. Today I was tinkering with meguiars...

I am back sooner than I want to be bothering you all again. Sorry any inconvenience to those that do this as a living. I’m sure this is the last thing you want to do at end of your day. Sincerely thank you all in advance!!! code is P103 which indicates high voltage in MAF sensor. I deleted it...

I have tried my fair share some of the windshield coating. Here are some I thought didn’t perform well and didn’t like carpro 30 & 40, gyeon, glassparency, Kamikaze, glass science Ones that did work for Either durability or moving water quickly were Gtech, H2Go, aquapel. I have purchased...

I got a CEL light po128 on 2013 Ford Edge. I’m going to change thermostat. The code mean the coolant is under temp I believe. I think my thermostat is stuck open. I am by no means a mechanic and any advice would be greatly appreciate.

Here is a week old Nu finish graphene panel is dirty the water on it is during a rain storm. Beading pretty good it is thicker like BSD I paid $21 for it. I have used there ceramic spray coating and liked it. It was a solvent alcohol based spray.

I was going to name the thread “COVID19 Tea bagged Me” but it might have been taken a couple different ways. I have vaccine and booster am healthy ran marathons but none within last few years because of kids. Eat healthy most of time. Took a child to birthday party and got COVID19 that way I’m...

So I have been chasing down and praying my P0430 and P0420 cats efficiency below threshold codes were due to a vacuum leak with unmetered air getting in somewhere after the maf sensor. I put in new spark plugs, cleaned maf, Put in new O2 sensors, upper and lower intake gaskets, throttle body...

I have alot of others compound/polishes Megs, Griots, Sonax, 3D ect I’m specifically looking at the 3D one Scholls s20black or Scholl S2 Black my intended use is a heavy one step. I want Cut most importantly, open time second most important and third gloss. I have some large fleet vehicles to...

Ceramic coated my $2 dollar wash bucket

Question I can’t seem to get an answer see below but here is some background info. The oil filter states efficiency of 99% of contaminates of 20 microns for 20,000 miles. Dang YouTube started putting these videos up in my feed and I have been watching for last couple days. People compare oil...

This is a gem hard to find because it was pre seal and shine and they stopped making it a while back. It last of my stock so I pulled it out it is close to paint and thick. No pigment. Turtle wax made a second coating that had dye both where great. Pictures are of 1 coat it is a very glossy...

I do my own work…sometimes if it’s not winter. Just did inner, outer tie rod, struts, rear shocks, caliper, rotors, brakes, stabilizer, new Lca with ball joint already pressed in. But got stopped dead in my track by wheel bearings already bought one tool that didn’t work, tried a lot of...

I have a few 8mm polisher and 1 of them is going to get converted to hopefully and orbital wood sander. All comments welcome. If you think it bad idea please feel free to comment. what backing plate should I use to accomplish this for sanding or finish sanding. 2nd project is makita rotary I...

$14 for 24oz, rubbing alcohol scented , cheap and streaky just like I like my products! Its definitely a cool to play with product and if over applied streaks the best way to describe is since there’s a lot of alcohol in it the evaporation is quick and it’s leaving some type of solid. Weather...