Recent content by imported_Unreal

I was wandering what everyones favorite glaze is? I am going the all carnuba route this time and would like to put a glaze down before hand but I have no experiance with anything other than Megs #7. Thanks guys

Hey all I just used Souveran for the first time today. I only put one layer on so far. I am probably going to go with 3 all togethor. Do you need to wait any legnth of time between layers? Thanks, Tommy

I just recieved my first bottle of Menzerna IP and FP II. I was wandering what PC settings would you reccomend for these products?

I first used z2 last summer before the z2pro was available and i still have 3/4 bottle of z2 left. I was wandering is the difference between z2 and z2pro enough to waste 3/4 bottle of the original z2?

OK all I have very very rarely ever use wheel cleaners to clean the wheels. What I normally do is mix a seperate bucket of wash with a rather harsh dose of car wash and wash the wheels with that instead of using "wheel cleaners" I have always been afraid of wheel cleaners do to this: Most...

Over the weekend I decided to put the truck in its first ever show. I decided to not enter into the competition but to just show in the fun field. I decided last weekend to use a all Zaino detail on the exterior for this event. I have Z5x5 on the paint and Z16x3 on the tires and Z16 on all...

I was wandering if my way doing this is wrong and if it hurts anything or is just wastefull of the QD and cause bonding problems, I use this method for whatever sealent I am applying example: Before adding additional layers after waiting for the cure time I: Wash vehicle dry vehilce...

Will either of these remove minor swirls? The swirls arent very bad at all and can only be seen when hit at the exact right angle by direct sunlight. I dont really wanna have to use something as strong as IP unless I have to.

First off I am not sure if this belongs here or not. If its not in the right place I am sorry. Through many different products tried the last 2 summers and not really finding one that really stood out I am still on the quest to find that AWESOME shine that appeals to ME! I decided to give...

I put 3 layers of Z5 on yesterday and it turned out great. What I was wandering is there much difference between the look of Z5 and Z2?

I just used this for the first time about 45 mins ago. What I am wandering is the bottle said to mix 2-3 cap fulls with 1 gallon of water. I put in 3 cap fulls in 1 gallon bucket. What puzzels me is there wasnt alot of suds. It seemed to clean very well and had alot of lubricity to it but...

I am going to put the first 3 layers on using ZFX. What I was wandering is the ZFX needed for every layer after the first 3 even if your only going to use 1 layer a day after the first day or is it like the Z1 and only need be applied every 10 layers?

I was wandering what your favorite towel is for removal of sealents? I have been thinking of getting some of the DF Towels but cant find much info on them. Also do you like alot of nap and plush towels for removal of sealents or do you like smooth ones?

I was wandering what is a good tape to get to cover trim so it doesnt get wax or polish on it?

I was wandering if its just me or do you find that topping most sealents doesnt really do much to the final product. I have topped: UPP w/ Trade Secret UPP w/ P21S EX-P w/ Nattys EX-P w/ Trade Secret Zaino w/ Trade Secret Zaino w/ P21S And to me the results didnt really do anything...