VM -- best by hand or PC?

H

harryp

New member
I'm about to apply VM after SSR2.5.

Best by hand or with an orbital. If using an orbital what pad works best? I'm considering a Lake Country grey finishing pad.

Also, if I top this with EX-P -- by hand or orbital and best pad for that?

thanks
 
I normally apply VM by PC (dual action, random orbital) with a Lake Country white polishing pad. Spread the product at spread at speed 2, and then work it at speed 4.0-4.5.

I also apply the first coat of EX-P by PC but with a finishing pad. I use speed 3 for this process. I apply a second coat by hand (with a damp PVA applicator) to ensure complete coverage. Wait at least 24 hours between coats.
 
I agree with awd330 and using the PC. What I do is apply it twice. The first time with a polishing pad, and the second with a finishing pad. I then go around and do the spots that the buffer couldn't reach by hand. Have fun with it. If this is your first VM experience, you'll love it!!!! Top it with EXP and you'll have a great looking vehicle that has all of the great characteristics. (depth, shimmer, shine, and clearity)
 
what she said ! :)

awd330 said:
I normally apply VM by PC (dual action, random orbital) with a Lake Country white polishing pad. Spread the product at spread at speed 2, and then work it at speed 4.0-4.5.

I also apply the first coat of EX-P by PC but with a finishing pad. I use speed 3 for this process. I apply a second coat by hand (with a damp PVA applicator) to ensure complete coverage. Wait at least 24 hours between coats.
Click to expand...


awd the VM master!
 
I also use a PC for VM application. I use a white polishing pad from CMA and work it in at 4-5. I think the PC produces better results. Just my opinion.
 
I agree with everyone else. In almost all cases, the PC is the best way to apply a product...Its just faster and it enables more complete coverage than by hand...Its the best investment Ive made so far!
 
Great feedback

I'm another that is migrating away from Zaino due to the acrylic plastic look of the sealant.

The car currently has Zaino Z5 / Z2 on it. I've been told that the VM with a PC will remove the Zaino.

It that correct or should I get rid of the Zaino with either SS1 or Menzerna FPII?
 
VM should remove it - AIO or you can go out and get Meguair's Deep Crystal step one - a chemical cleaner/polish that will do the trick for cheap.
 
VM will remove the Zaino without a problem. The white LC pads are what I use. I tried the orange pads, but got some micro-marring.
 
You must log in or register to reply here.
Back
Top